Categories
• Weight: 9.4 kg.
• Operating voltage 12V.
• Mac `Peak` current: 3500A.
• Max starting current: 1200A.
• Capacity 20 Ah.
• Dimensions (L x W x H): 400 × 320 × 115 mm.
• Charging with the LOAD button and reading the value directly on the screen.
• Green LED ( GOOD ) : Value > 10.8V.
• Yellow LED ( LOW ) : 10.8V > value > 9.1V.
• Red LED ( BAD ) : 9.1V > value.
• Connecting clamps on the battery terminals.
• CCA adjustment based on the value indicated on the battery.
• Quantity of elements: 19
• Tools compatible with the new VW-Audi group connectors.
• Can be used on: coolant sensors, wiring harnesses and calculator connectors.
• Preserves the wire and lug.
• Knurled grips.
• Maximum load: 0.4T
• Weight: 0.296 kg
• Also suited to wipers with or without built-in nozzle.
• 12 V voltage.
• 1600 A maximum peak amp.
• 440 A maximum cranking amp.
• Weight: 6 kg
• For petrol and diesel engines.
• Protection fuse
• Booster with UK plug: E200413.
• 12 - 24 V.
• Weight: 0.22 kg
• Ideal for checking circuits, fuses, switches and wiring on cars, trailers, boats, motorcycles and other low voltage systems.
• Connect the crocodile clamp to ground to test using the contact tip.
• Lamp in the grip indicates the present of voltage.
• Polarity testing: + / -. LED
• Voltages: 6-12-24-50-120-230-400 V.
• DC / AC: 50~60 Hz.
• 19 mm testing tip spacing (for sockets).
• Weight: 0.176 mm
• Allows to check the lack of voltage on a circuit before starting the works.
• Testing tip storage system.
• 2 1.5 V LR44 batteries supplied.
• IP 54.
• IEC 61243-3/CAT III 600 V/CE standard.
• DC voltage measurement from 2V to 24V.
• Weight: 0.548 kg
• AC voltmeter: 0 to 600 V.
• DC ammeter: 0 to 400 A.
• Ohmmeter: 0 to 20 MΩ.
• Continuity: < 30 Ω.
• Measurable cable diameter: ø 32 mm.
• Weight: 0.235 kg
• DC / AC voltmeter: 0 to 250 V.
• Ohmmeter: 0 to 20 MΩ.
• Diode test. 2.8 V / 1 mA.
• Weight: 0.323 kg
• For 24V batteries, from 20 Ah to 200 Ah.
• Maximum output current 10A.
• Power supply: 220 - 240V, 50 - 60 Hz.
• Supplied with alligator clips.
• Compatible with all "lead acid" batteries: VLRA, GEL, AGM, Liquid.
• For 12V batteries, from 6Ah to 130 Ah.
• Charging level indicator.
• 'Wake-up' mode for batteries discharged to 0.2V.
• Multimode damage-free fast charging controlled by microchip.
• 'Floating' mode to maintain batteries charged.
• Protections against short-circuits, reversed polarities, overloads.
• For 12V batteries, from 10 Ah to 230 Ah.
• Maximum output current 15A.
• Power supply: 220 - 240V, 50 - 60 Hz.
• Supplied with alligator clips.
• Starting booster.
• Operating voltage 12V - 24V.
• Power safety and reversed polarity alarm.
• Voltage selection by power plug.
• Auxiliary power plug. (For cables in option).
• Capacity 2 X 50 Ah.
• Sealed internal AGM battery.
• Mac "Peak" current: 7750A.
• Max starting current: 3200A.
• TCFC: 1000A.
• Double insulation copper cables 70 mm² 2.10 m long.
• Maks. napięcie robocze: 600 V AC rms, kat. IV
• Maks. rozwarcie szczęk: 52 mm
• Maks. grubość przewodu: 50 mm
• Umożliwia pomiar natężenia prądu bez kontaktu
• Facilitates accessibility to connectors.
• For circuit up to 49 Volts.
• Comprising:
- 1 nylon bag.
- 2 measurement cables.
- 2 needles.
- 2 Pic probes.
- 1 needle storage tube.
Weight: 136 g
• For automotive diagnostics requiring measuring on small connectors without damaging them.
• All these accessories can be used with an electric tester or a diagnostic device.
Voltmeter: AC / DC 0 → 600 V.
Ammeter: AC / DC 0 → 400 mA.
Ohmmeter: 0 Ω → 40 MΩ.
Frequency meter: 1 Hz → 400 kHz.
